Technical Resources: Datasheets and Photometric Files
Every KELVANO fitting has a one-page datasheet PDF, listed below with its KV code and its product page. The datasheets download directly, with no form and no registration. IES and LDT photometric files can be measured for project specifications: ask for the models you are specifying and we return them with the quotation.
Datasheet for every product
Each sheet is built from the product page it belongs to, so the two carry the same figures. Where a figure is still confirmed on your quotation, the sheet says so rather than estimating it.
| Product | KV code | Datasheet | Page |
|---|---|---|---|
| 48V Magnetic Track Lighting System | KV-MT-101 · KV-MT-102 · KV-MT-103 | Open | |
| Anti-Glare COB Downlight KV-DL-101 | KV-DL-101 | Open | |
| Deep Recessed Adjustable Spotlight KV-SP-102 | KV-SP-102 | Open | |
| Dimmable Recessed Spotlight KV-SP-104 | KV-SP-104 | Open | |
| KELVANO LED Batten & Linear Lighting | KV-TL-101 · KV-TL-102 | Open | |
| KELVANO LED Downlights | KV-DL-101 · KV-GD-101 | Open | |
| KELVANO LED Grille Track Spotlights | KV-TG-101 | Open | |
| KELVANO LED High Bay Lights | KV-HB-101 | Open | |
| KELVANO LED Track Grille Spotlight KV-TG-102 | KV-TG-102 | Open | |
| KELVANO LED Track Grille Spotlight KV-TG-103 | KV-TG-103 | Open | |
| KELVANO LED Track Grille Spotlight KV-TG-104 | KV-TG-104 | Open | |
| KELVANO LED Track Lighting System | KV-TS-101 · KV-TS-104 | Open | |
| KELVANO LED Track Spotlight KV-TS-101 | KV-TS-101 | Open | |
| KELVANO LED Track Spotlight KV-TS-105 | KV-TS-105 | Open | |
| KELVANO LED Track Spotlight KV-TZ-101 | KV-TZ-101 | Open | |
| KELVANO LED Tri-Proof Light KV-TP-102 | KV-TP-102 | Open | |
| KELVANO LED Tri-Proof Light KV-TP-103 | KV-TP-103 | Open | |
| KELVANO Pull-Out Gimbal Downlight | KV-GD-101 | Open | |
| KELVANO Surface Mounted LED Downlights | KV-SM-101 | Open | |
| LED Floodlight KV-FL-101 | KV-FL-101 | Open | |
| Mini Pinhole Recessed Spotlight KV-SP-103 | KV-SP-103 | Open | |
| Prismatic Recessed Downlight KV-DL-103 | KV-DL-103 | Open | |
| Recessed Tiltable Downlight KV-SP-105 | KV-SP-105 | Open | |
| Round Grid Downlight KV-GR-101 | KV-GR-101 | Open | |
| Round Tube Tri-Proof Light KV-TP-101 | KV-TP-101 | Open | |
| Square Grid Downlight KV-GR-102, Single and Double Head | KV-GR-102 | Open | |
| Surface-Mounted Tiltable Spotlight KV-SM-101 | KV-SM-101 | Open | |
| Twin-Row Angled Linear Track Light KV-TL-103 | KV-TL-103 | Open | |
| White Linear Track Light KV-TL-104 | KV-TL-104 | Open |
The whole range in one file
The datasheets above cover one product each. The full catalogue puts every range in a single PDF, built from the same product data, for a buyer comparing families rather than checking one model. It is the only file on this site behind a form, and the form is four fields.
Download the full catalogue
Every KELVANO range in one PDF: specifications, ordering codes and the supply terms, built from the same product data as the individual datasheets. Tell us where to send it and the link appears straight away.
Individual datasheets need no form. This one file covers the whole range.
IES and LDT photometric files can be measured for project specifications
Photometric files are measured on a goniophotometer for the model and the configuration you are specifying, which is why they are produced on request rather than held as a library. Send the KV codes, the wattages and the beam angles on the schedule and we return the IES or LDT set with the quotation. The same request covers a lighting layout, which we can prepare for qualified projects. How the measurement works is described on the sourcing page, and what to ask any factory for is in the supplier guide.
Where to start
For the ranges rather than the sheets, see LED track lighting, LED downlights and the full product range. The selection references are in the lighting guides, and the inquiry form is at the foot of this page or on the contact page.
Send your project.
Get pricing in 24 hours.
- Quotation within 24 hours, FOB, or DDP for the UK and EU, pricing by quantity
- Samples are charged at USD 100–300 per piece, depending on the product and its configuration. Standard samples are ready in 7 days; samples that need new tooling are quoted with their own lead time. The sample charge is credited against your first order over USD 3,000 placed within six months.
- Orders of around 500 units ship in 25–35 days from the deposit; larger or customised orders are confirmed on the proforma invoice.
- IES and LDT photometric files can be measured for project specifications
- Answered by our project team